增材制造金属反射镜的发展综述

随着光学测量与遥感领域的不断发展,折反式光学系统对重量、体积和环境适应性等需求不断提高。基于增材制造技术的金属反射镜以其便于实现优化设计、快速制造和加工工艺性好等优点,逐渐获得国内外学者的关注与研究。与传统金属反射镜相比,增材制造金属反射镜可以提高反射镜的结构刚度,同时可实现更高程度的轻量化。增材制造反射镜可以满足光学系统对环境适应性和快速性的需求。本文首先讨论了金属反射镜的评价指标;其次,综述了国内外在基于增材制造技术制备金属反射镜领域的发展现状和技术参数,从增材制造金属反射镜的基体设计与制备和基体的后处理2个方面展开论述;然后,通过分析,总结了增材制造金属反射镜的技术路线和关键技术;最后,对增材制造反射镜的应用前景提出了展望。     

基于非线性光纤环形镜的少模脉冲幅度调制再生器

随着网络带宽需求的快速增加,波分复用系统的容量已接近非线性香农极限.为了适应未来网络的发展,空分复用技术引起了越来越多的关注.本文首次提出基于少模非线性光纤环形镜(FM-NOLM)的脉冲幅度调制(PAM)全光再生器,描述了其工作原理和具体设计过程.采用COMSOL软件对组成FM-NOLM的硫化物高非线性光纤进行了模式特性仿真.以LP01,LP11,LP21三个光纤模式为例,确定了再生器的参数,计算出每个模式的功率转移函数曲线.仿真分析了该少模PAM-4全光再生器的噪声抑制(NRR)性能,并与单模情形进行了比较.研究表明,1)对于每个空间模式的PAM信号,所有再生电平具有一致的功率转移性能;2)当输入信噪比(SNR)约大于20 dB时,三种模式的噪声抑制比均可超过3 dB,并随着输入信噪比线性增加,其斜率约为1.2;3)在相同输入SNR条件下,三种模式的噪声抑制比相差不大,不超过1.1 dB.为了说明再生器的再生性能,当输入SNR为25 dB时,我们还给出了再生前后PAM-4信号的功率分布直方图.与现有的再生方案相比,本文方案的均匀多电平再生转移性能,使其更适合高频谱效率的长距空分复用系统和任意电平数的PAM信号再生.此外,该方案也能够扩展到波长域,有效提高光通信系统的传输容量.     

Stabilization of a viscoelastic rotating Euler‐Bernoulli beam

In this paper, we consider a rotating Euler‐Bernoulli beam. The beam is made of a viscoelastic material, and it is subject to undesirable vibrations. Under a suitable control torque applied at the motor, we prove the arbitrary stabilization of the system for a large class of relaxation functions by using the multiplier method and some ideas introduced by Tatar (J. Math. Phys. 52:013502, 2011).     

Coriolis Effect on the Linear Stability of Convection in a Porous Layer Placed Far Away from the Axis of Rotation

The linear stability theory is used to investigate analytically the Coriolis effect on centrifugally driven convection in a rotating porous layer. The problem corresponding to a layer placed far away from the axis of rotation was identified as a distinct case and therefore justifying special attention. The stability of the basic centrifugally driven convection is analysed. The marginal stability criterion is established as a characteristic centrifugal Rayleigh number in terms of the wavenumber and the Taylor number.     

光机械式红外探测器中镜面弯曲对探测灵敏度的影响(英文)

光学读出式红外成像技术是近年来研究的热点,本文讨论了镜面弯曲对光学检测灵敏度的影响。由双材料微悬臂梁组成的非致冷焦平面阵列通过体刻蚀工艺加工而成,由于残余应力的影响,制成的焦平面阵列将会发生弯曲,应力导致的镜面弯曲将会降低光学探测灵敏度。本文通过傅立叶光学模拟了镜面弯曲对光学探测灵敏度的影响,并通过实验验证了该模型。实验和模拟结果表明,在镜面曲率为0 .1mm-1时,光学探测灵敏度将会降低到理想情况的40 %。最后我们用这个模型评价了通过表面修饰来提高光学性能的效果。     

FJZ-1000型超高速转镜分幅相机及其应用

FJZ-1000型超高速转镜分幅相机最高摄影幅频为1107幅/s，画幅总数160幅，尺寸7.5 mm10 mm。光学系统中新加入场镜以使相机的所有画幅均完整成像，使相机摄影频率全面达到标称值的技术指标。配备了新型数字化微机控制台，使相机的操作更加方便，并且实现了两台气动相机的联合拍摄，与脉冲X光机也进行了联动实验。相机达到了设计技术性能指标，实验取得了满意的结果。     

Turbulent flow of mildly elastic fluids through rotating straight circular tubes

The turbulent flow of mildly elastic drag reducing fluids through a straight tube rotating around an axis perpendicular to its own is analysed using boundary layer approximations. The momentum integral approach is used and the governing equations have been solved numerically using the Runge-Kutta-Merson method. The influence of the Deborah number on the velocity distribution and the boundary layer thickness has been exemplified through the analysis. NCL Communication No. 3354.     

The annular twist mapping of the restricted three-body problem

This paper presents a new derivation of the twist mapping in the planar restricted problem. It differs from other treatments in the use of a novel canonical transformation which allows for the utilization of symplectic reduction techniques.     

Plasma in a high-frequency electric field with a reflective condition on the boundary

An analytical solution is obtained for the linearized problem of the behavior of a collisional gas plasma in a half-space in an external alternating electric field. It is assumed that the electrons are mirror-reflected from the plasma boundary. The solution is used for finding the screened field. The case of an external field frequency close to the plasma frequency is investigated separately.     

The Stress Response of Functionally Graded Isotropic Linearly Elastic Rotating Disks

The purpose of this research is to investigate the effects of material inhomogeneity on the response of linearly elastic isotropic solid circular disks or cylinders, rotating at constant angular velocity about a central axis. The work is motivated by the recent research activity on functionally graded materials (FGMs), i.e., materials with spatially varying properties tailored to satisfy particular engineering applications. The analog of the classic problem for a homogeneous isotropic rotating solid disk or cylinder is considered. The special case of a body with Young"s modulus depending on the radial coordinate only, and with constant Poisson"s ratio, is examined. For the case when the Young"s modulus has a power-law dependence on the radial coordinate, explicit exact solutions are obtained. It is shown that the stress response of the inhomogeneous disk (or cylinder) is significantly different from that of the homogeneous body. For example, the maximum radial and hoop stresses do not, in general, occur at the center as in the case for the homogeneous material. Furthermore, for the case where the Young"s modulus increases with radial distance from the center, it is shown that radially symmetric solutions exist provided the rate of growth of the Young"s modulus is, at most, cubic in the radial variable. It is also shown for the general inhomogeneous isotropic case how the material inhomogeneity may be tailored so that the radial and hoop stress are identical throughout the disk. This revised version was published online in August 2006 with corrections to the Cover Date.